Go Bottom3 pt broke
 | greencougar
Join Date: Jul 2006 Posts: 2 Wisconsin 
|
2006-07-04 131676
I need a little help. I was pulling a bid tree when the 3 pt on my kubota 2650 GST broke. Nothing that I can see on the outside and everything else still works. I started to take it apart and my guess is there is something broken in the hydrolic block. I was hoping there may be a pressure relief value or something safety thing that went... But I'm never that lucky.. Any thoughts would be greatly appreciately.. and maybe send along some air tools... thanks
Reply to |
Quote Reply |
Add Photo3 pt broke
 | earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan 
 Pics
|
2006-07-04 131678
Explain what you mean by "broke". Does it lift at all? Does it drop at all? Lifts jerkily? ....
Reply to |
Quote Reply |
Add Photo3 pt broke
| greencougar
Join Date: Jul 2006 Posts: 2 Wisconsin
|
2006-07-04 131680
It doesn't work at all. Just falls to the ground. The lever moves back and forth and I can lift the arms of the 3 pt up by hand. No leaking anywhere, nothing is bend. I was pulling a large pine tree and I heard a loud noise. I thought part of the tree broke. Today I took all the sheet metal off down to the case. I would rather not dig into the case. I have a detailed blowout of the parts but that's it. My plan is to take the case apart and look for a broken pin, bolt, or something obvious. And pray for no rain since I'm doing it in the driveway... ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This